What is the Best Way to Clean Engine Oil?

Challenges in Cleaning Engine Oil

Engine oil is a mix of base oils and special additives. It lubricates, cools, and protects engine parts. Its thickness lets it flow in hot or cold conditions. Additives help reduce wear, stop rust, and keep things clean. But over time, engine oil breaks down from heat and picks up nasty stuff, making it less effective.

What Contaminants Build Up in Used Engine Oil?

Used engine oil gets dirty with things like tiny metal bits from engine wear, soot from burning fuel, broken-down oil bits, and water. These mess up the oil’s job and can harm equipment if not cleaned out properly.

Why Are Wrong Cleaning Methods Dangerous?

Using the wrong way to clean engine oil can cause trouble. For example, rough materials might add more dirt to the oil. Chemicals not meant for the oil can ruin its qualities or leave behind bad stuff that hurts the engine.

Effective Ways to Clean Engine Oil

Manual cleaning uses simple tools like filters, absorbent pads, or spinning machines to pull out solid dirt. But it takes a lot of work and isn’t great at catching tiny stuff like water or air bubbles.

How Does Manual Cleaning Work? What Tools Are Needed?

Manual cleaning uses basic gear like filters, pads, or centrifuges to grab solid bits from the oil. It’s cheap and simple for small jobs but needs lots of effort.

What Are the Downsides of Manual Methods?

Manual cleaning struggles with super small contaminants, like dissolved water or air. It also misses out on automation, which could save time and cut down on mistakes.

Are Chemical Cleaners Any Good? What Chemicals Are Used?

Chemicals like degreasers or solvents can break up dirt in engine oil. But they only work well if they match the oil type being cleaned.

What Safety Steps Should You Take with Chemicals?

When using chemicals, always wear gloves and goggles. Work in a well-ventilated space to avoid breathing fumes. Follow the rules for throwing out used chemicals to protect the environment.

Why Use an Engine Oil Cleaning Machine?

Engine oil cleaning machines, like Ourun’s, use fancy centrifugal vacuum filtration to yank out dirt, water, and air without using up filters. They’re a game-changer compared to other methods.

How Do These Machines Work?

These machines spin oil super fast under a vacuum to separate junk like solid bits, water, and air. This keeps the oil clean without wasting filter materials.

What’s the Role of Filtration Systems?

The filtration systems in engine oil cleaning machines are top-notch. They pull out solid dirt, water, and even air bubbles. Centrifugal vacuum tech makes this happen without needing replaceable filters.

What Cool Tech Do Modern Machines Have?

Modern machines, like Ourun’s, come with smart PLC controls for easy, automatic use. They fit right into high-tech factories. They handle oils from super thin to thick (1-680 mm²/s) and work in crazy temps (-40℃ to 300℃).

Why Pick an Engine Oil Cleaning Machine Over Other Methods?

Using a dedicated machine has big perks:

• Speed: They clean tons of dirty oil fast.
• Savings: No need for throwaway filters cuts costs.
• Eco-Friendly: Smart designs stop spills and leaks.
• Trustworthy: Cleaner oil means machines last longer and work better.

Ourun’s Smart Solutions for Engine Oil Cleaning

Ourun’s engine oil cleaning machines use cutting-edge centrifugal vacuum tech to clear out dirt, water, and air from all kinds of industrial oils. They work with hydraulic, gear, turbine, and even tricky fluids like phosphate ester oils. These machines shine in harsh conditions (-40℃ to 300℃) and use zero-waste filtration to save cash. With PLC automation, high dirt-holding power (over 1 kg), and tough stainless steel parts, Ourun’s machines beat competitors. They deliver cleaner oil, longer machine life, and greener results.

Overview of Ourun’s Product Line for Oil Cleaning

Features and Specs of Ourun’s Machines

Ourun’s engine oil cleaning machines are built for tough industrial jobs. They use centrifugal vacuum tech to remove solid dirt, water, and air from oils. A smart PLC system runs things automatically, making them easy to use in modern factories. The centrifuge drum holds over 1 kg of gunk, so it can handle a lot. Plus, they use zero-consumption filtration, meaning no filter replacements and lower costs.

These machines work with oils from 1 to 680 mm²/s and handle extreme temperatures (-40℃ to 300℃). Their vacuum centrifugal design means no filter waste, making them kind to the planet and your wallet.

Compatibility with Different Engine Oils

Ourun’s machines work with tons of oils, like hydraulic, gear, turbine, transformer, and compressor oils. They even handle corrosive stuff like phosphate ester and water glycol oils. They’re perfect for places where super clean oil with low water is a must. Whether the oil is thick or full of junk, these machines get the job done.

Why Ourun’s Products Beat the Competition

When picking an engine oil cleaning machine, look at speed, cost, and green impact. Ourun’s machines stand out because:

• Fast Work: They clean big batches of dirty oil quickly.
• Money Savers: No filter waste means less spending over time.
• Green Design: Stainless steel parts stop leaks and last ages.
• Reliable: Clean oil keeps machines running smoothly for longer.

Tips for Getting the Best from Ourun’s Products

To keep Ourun’s engine oil cleaning machines running great, follow these tips: Ground the machine properly, don’t let the outlet pipe get too high, and secure the centrifuge drum lid tightly. Clean the drum regularly based on how dirty the oil is, and never open the lid until the machine stops.

Best Practices for Using Ourun’s Machines

Maintenance Tips to Make Machines Last

To keep your machine in top shape:

• Ground it well to avoid electrical mishaps.
• Keep the outlet pipe lower than the oil exit to avoid motor strain.
• Tighten the centrifuge drum lid to keep dirt evenly spread.
• Clean the drum often, depending on the oil dirtiness.
• Wait for the machine to fully stop before opening the lid.

These steps reduce wear and keep things running smoothly.

How to Use Machines for Best Results

Use these tricks for great performance:

• Check oil thickness to match machine specs.
• Use in recommended conditions (like -20℃ to 40℃).
• Avoid shaky or gassy areas.
• Use the right precision filters for super clean oil (NAS1638 5-7 grade).

These keep the machine working well and cut downtime from bad use.

Environmental Impact and Green Practices

How Ourun’s Products Help the Planet

Ourun’s engine oil cleaning machines support green goals with smart designs:

• Less Trash: No throwaway filters means less waste.
• Tough Parts: Stainless steel lasts long, so fewer replacements.
• Energy Savers: Smart controls use less power.

These align with efforts to make industries cleaner and less wasteful.

Cutting Waste with Oil Recycling

Recycling used engine oil helps stop pollution. Ourun’s machines are great at separating junk from reusable oil without wrecking it. Using vacuum dehydration and precision filters, they restore oil so industries can reuse it instead of tossing it out too soon.

FAQ

Q1: What junk can Ourun’s machines remove from engine oil?
A: They clear out solid bits, water (free water: 100%, dissolved water: 80%), air bubbles, and broken-down oil stuff.

Q2: Can these machines handle thick oils?
A: Yup, they work with oils up to 680 mm²/s and stay strong in wild temps (-40℃ to 300℃).

Q3: How do they save money?
A: No filter waste and less upkeep mean big savings over time.